Small Articulated Loaders / L28 Small Articulated Loaders
Specifications & Options
L28
Close/Open All PDF version
Tipping load - Straight - Bucket
1,392 kg
Tipping load - Straight - Forks
945 kg
Tipping load - Straight - Extended - Bucket
805 kg
Tipping load - Straight - Extended - Forks
601 kg
Tipping load - Articulated - Bucket
1,109 kg
Tipping load - Articulated - Forks
759 kg
Tipping load - Articulated - Extended - Bucket
645 kg
Tipping load - Articulated - Extended - Forks
479 kg
Rated Operating Capacity - Straight - Bucket
696 kg
Rated Operating Capacity - Straight - Forks
473 kg
Rated Operating Capacity - Straight - Extended - Bucket
403 kg
Rated Operating Capacity - Straight - Extended - Forks
301 kg
Rated Operating Capacity - Articulated - Bucket
554 kg
Rated Operating Capacity - Articulated - Forks
380 kg
Rated Operating Capacity - Articulated - Extended - Bucket
323 kg
Rated Operating Capacity - Articulated - Extended - Forks
239 kg
Lift Capacity
1,085 kg
Breakout Force - Boom
1,141 kg
Make / Mode
KUBOTA / D1305-E4B-BC-1
Fuel
DIESEL
Cooling
53% PROPYLENE GLYCOL / 47% WATER MIXTURE
Power at 2600 RPM (ISO 14396)
18.2 kW
Torque at 1700 RPM (ISO 14396)
81.3 Nm
Number of cylinders
3 IN-LINE
Displacement
1.3 L
Operating weight
1,903 kg
Shipping weight
1,731 kg
System Relief
20 MPa
Implement Pump
ENGINE DRIVEN GEAR TYPE
Implement Pump Capacity
45.8 L/min
Main Filter
REPLACEABLE 16(c) ≥ 75 ISO 4572, SPIN ON WITH O-RING, 0.34 MPa [50 psi] BYPASS
Tank Breather Filter
NON-REPLACEABLE 10 MICRON, THREAD-ON CAP
Control Valve
MANUALLY OPERATED SERIES TYPE (LIFT & TILT FUNCTIONS) WITH FLOAT DETENT ON LIFT. E/H OPERATED PARALLEL TYPE (AUX & TELESCOPIC FUNCTIONS)
Hydraulic Fluid
PREMIUM GRADE, ANTI WEAR, MULTI VISCOSITY ISO VG46, PETROLEUM BASED
Cooling System
5.7 L
Fuel tank
36.2 L
Engine Oil
3.8 L
Hydraulic and Hydrostatic System
20.8 L
Transmission
4 Wheel Drive with automatic drive modes, Optional Traction assist function
Alternator
90 A OPEN FRAME WITH INTERNAL REGULATOR
Battery
12 VOLT BCI GROUP 26; 540 AMPS COLD CRANKING CAPACITY AT 0 F (-18 C); 80 MINUTE RESERVE CAPACITY
Starter
12 V GEAR TYPE 2.0 kW [2.68 hp]
Ignition Switch
ACTIVATES STARTER AND INSTRUMENTATION
Raising time
2.6 s
Lowering time
2.2 s
Dump time
1.4 s
Rollback time
1.8 s
(A)
Cab Height
1,983.7 mm
(B)
Ground Clearance
139.1 mm
(C)
Wheelbase
1,200 mm
(D)
Overall Length with Bucket
3,109 mm
(F)
Dig Depth
19.5 mm
(G)
Maximum Dump Height
2,136.4 mm
(H)
Load Over Height
30 °
(I)
Hinge Pin at Maximum Height
2,650.6 mm
(J)
Departure Angle
23 °
(K)
Turning Radius Over Bucket
2,407.7 mm
(L)
Turning Radius Inside Tire
931.5 mm
(M)
Width Over Bucket
1,270 mm
(O)
Machine Width
1,180.7 mm
(P)
Articulation Angle
43 °
(Q)
Dump Angle at Maximum Height
40 °
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.