India
Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Skid-Steer Loaders / S510 Skid-Steer Loader

Specifications & Options

S510

Close/Open All PDF version
Tipping load (ISO 14397-1)
1,619 kg
Rated operating capacity (ISO 14397-1)
810 kg
Pump capacity
64.7 L/min
System relief at quick couplers
23.8-24.5 MPa
Max. travel speed (high range - option)
17.3 km/h
Max. travel speed (low range)
11.8 km/h
Make / Model
Kubota / V2403-MDI-E3
Fuel
Diesel
Cooling
Liquid
Power at 2700 RPM:
34.4 kW
Torque at 1425 RPM (SAE J1995 Gross)
158.6 Nm
Number of cylinders
4
Displacement
2,433 cm3
Fuel tank
93.7 L
Operating weight
2,686 kg
Shipping weight
2,343 kg
(A)
Operating height
3,787 mm
(B)
Height with operator cab
1,972 mm
(C)
Angle of departure
24.2 °
(D)
Ground clearance
185 mm
(E)
Wheelbase
1,082 mm
(F)
Length without attachment
2,657 mm
(G)
Length with standard bucket
3,378 mm
(H)
Rollback at ground position
30 °
(I)
Dump height with standard bucket
2,205 mm
(J)
Height to bucket hinge pin
2,908 mm
(K)
Dump reach at maximum height
467 mm
(L)
Dump angle at maximum height
42 °
(M)
Rollback fully raised at maximum height
97 °
(N)
Width over standard bucket
1,727 mm
(O)
Turning radius with standard bucket
2,032 mm
(P)
Track, standard tyres
1,374 mm
(Q)
Width over standard tyres
1,643 mm
(Q*)
Width over tyres, 10 x 16.5, 10-ply, Heavy duty, offset rims
1,520 mm
Vehicle steering
Direction and speed controlled by two hand levers
Loader hydraulics tilt and lift
Separate foot pedals or Selectable Joystick Controls (SJC)
Front auxiliary (standard)
Electrical switch on right-hand steering lever
Transmission
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
  • 10 x 16.5, 10–ply, Heavy duty tyres
  • Automatically activated glow plugs
  • Auxiliary hydraulics: variable flow/maximum flow
  • Bob-Tach™ frame
  • Bobcat Interlock Control System (BICS)
  • Electrically activated proportional front auxiliary hydraulics
  • Engine/hydraulics system shutdown
  • Manual
  • Lift arm support
  • Parking brake
  • Spark arrestor muffler
  • Standard Cab with rear window (1)
  • Standard Seat
  • Seat belt
  • Seat bar
  • Work lights, front and rear
  • Warranty: 24 months or 2000 hours (whichever occurs first)
  • Note: Standard features depends on country selection.

(1) Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471; Falling Object Protective Structure (FOPS) - meets requirements of SAE-J1043 and ISO 3449, Level I

  • Factory Options
    • 10 x 16.5, 10–ply, Versatile duty tyres
    • 10 x 16.5, 10–ply, Heavy duty tyres, offset rims
    • 10 x 16.5, 10–ply, Severe duty tyres
    • 12 x 16.5, Solid flex tyres
    • 31 x 12-16.5, 10–ply, Superflotation tyres
    • Attachment control device
    • Automatic Ride Control
    • Automatic Reversing Fan
    • Back-up alarm
    • Beacon
    • Bucket positioning kit
    • Cloth Suspension Seat
    • Custom paint color (min order of 5 units)
    • Deluxe instrument panel
    • Deluxe pressurized cab with heating
    • Deluxe operator cab with windows
    • Exhaust Shield
    • Fire extinguisher
    • High-Flow hydraulics
    • Power Bob-Tach™
    • Radio
    • Road Option
    • Sound option
    • Suspension seat
    • Selectable Joystick Controls (SJC)
    • Strobe
    • Tailgate lock kit
    • 2 Speed
    • EAC certification
  • Dealer Installed Options
    • Cab enclosure kit
    • Special applications front door kit
    • 200 lbs (74.4 kg) counterweight kit
    • Front axle counterweight kit
    • Fuel cap locking kit
    • Deluxe instrument panel
    • Replacement Bob-Tach™
    • Fresh air heater kit
    • Front door kit
    • Door sensor kit
    • Plumbing kit for fresh air heater
    • Back up alarm kit
    • FOPS kit **
    • Single-point lift kit
    • Power Bob-Tach™ kit
    • Operator cab, enclosure kit
    • 7-pin attachment control
    • Four-point lift kit
    • Rear auxiliary hydraulic kit
    • Engine block heater kit
    • Road kit
    • Bucket positioning kit
    • Keyless kit
    • Rear window wiper kit
    • 14-pin attachment control kit
    • 4-Way flasher kit
    • 80 mm Suspension seat kit
    • Cup holder kit
    • Headlight guard kit
    • Muffler guard kit
    • Tail light guard kit
  • Angle Brooms
  • Auger Accessories
  • Augers
  • Backhoes
  • Bale Forks
  • Box Blades
  • Breaker Accessories
  • Breakers
  • Brush Saws
  • Brushcat™ Rotary Cutters
  • Combination Buckets
  • Concrete Mixers
  • Construction / Industrial Buckets
  • Diggers
  • Dozer Blades
  • Drop Hammers
  • Dumping Hoppers
  • Fertilizer and Grain Buckets
  • Flail Cutters
  • General Purpose (GP) Bucket
  • Graders
  • Grapples, Industrial
  • Landplanes
  • Landscape Rakes
  • Laser Equipment
  • Low Profile Buckets
  • Miscellaneous
  • Mixing Buckets
  • Mowers
  • Pallet Fork Accessories
  • Pallet Forks, Hydraulic
  • Root Grapples
  • Scarifiers
  • Scrapers
  • Skeleton Buckets
  • Snow & Light Material Buckets
  • Snow Blades
  • Snow Pushers
  • Snow V-Blades
  • Sod Layers
  • Soil Conditioners
  • Spreaders
  • Steel Tracks
  • Stump Grinders
  • Sweepers
  • Tillers
  • Tilt-Tatch
  • Tree Transplanters
  • Trench Compactors
  • Utility Forks
  • Vibratory Rollers
  • Whisker Brooms
  • Wood Chippers

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.