Компактные экскаваторы / Компактный экскаватор E55z
Спецификации и опции
E55z
Закрыть/открыть все PDF version
Operating weight
5,218 kg
Additional weight for cab with heating
112 kg
Additional weight for cab with HVAC
131 kg
Additional weight for steel tracks
125 kg
Additional weight for long dipperstick
229 kg
Additional weight for long dozer blade
176 kg
Ground pressure with rubber tracks
30 kPa
(A)
Bucket pivot angle
186 °
(B)
Maximum reach of working equipment
5,983 mm
(B)
Maximum reach of working equipment, long dipperstick
6,361 mm
(C)
Maximum reach at ground level
5,843 mm
(C*)
Maximum reach at ground level, long dipperstick
6,232 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,541 mm
(D*)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,638 mm
(E)
Maximum blade height
390 mm
(F)
Maximum blade depth
547 mm
(G)
Maximum height of working equipment with dipperstick retracted
4,273 mm
(H)
Maximum bucket tooth height
5,513 mm
(H*)
Maximum bucket tooth height, long dipperstick
5,768 mm
(I)
Maximum dump height
4,008 mm
(I*)
Maximum dump height, long dipperstick
4,263 mm
(J)
Maximum depth of vertical wall which can be excavated
2,485 mm
(J*)
Maximum depth of vertical wall which can be excavated, long dipperstick
2,878 mm
(K)
Maximum digging depth
3,434 mm
(K*)
Maximum digging depth, long dipperstick
3,834 mm
()
(* Dentoes values which long dipperstick installed)
(A)
Blade height
422 mm
(B)
Clearance, upper structure to ground line
627 mm
(C)
Ground line to top of engine cover
1,659 mm
(D)
Length of track on ground
2,004 mm
(E)
Machine centre line to blade
1,784 mm
(F)
Minimum radius in travel position
4,300 mm
(G)
Overall length of track assembly
3,045 mm
(H)
Overall length in travel position
5,561 mm
(H*)
Overall length in travel position, long dipperstick
5,558 mm
(I)
Track lug height
24 mm
(J)
Blade width
1,959 mm
(K)
Height
2,566 mm
(L)
Track width
400 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
586 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
872 mm
(O)
Minimum turning radius
2,112 mm
(P)
Swing clearance, rear
1,071 mm
(Q)
Working width at maximum right-hand rotation
2,243 mm
(R)
Working width at maximum left-hand rotation
1,941 mm
Make / model
Kubota V2403-M-DI-TE3B-BC-5
Fuel
Diesel
Number of cylinders
4
Displacement
2.4 L
Maximum NET power (ISO 9249)
36.5 kW
Maximum NET torque (ISO 9249)
183 Nm
Pump type
SINGLE OUTLET VARIABLE DISPLACEMENT PISTON PUMP WITH GEAR PUMPS
Piston pump capacity
138.6 L/min
System relief pressure for implement circuits
250 bar
Boom port relief base and rod end
290.0 - 290.0 bar
Auxiliary (AUX1) flow
75.7 L/min
Auxiliary (AUX2) flow
45.4 L/min
Digging force, dipperstick (ISO 6015)
30,993 N
Digging force, long dipperstick (ISO 6015)
26,301 N
Digging force, bucket (ISO 6015)
44,297 N
Travel speed, low range
2.9 km/h
Travel speed, high range
4.6 km/h
Boom swing, left
75 °
Boom swing, right
50 °
Slew rate
9.3 RPM
Cooling system
7.6 L
Engine lubrication plus oil filter
6.3 L
Fuel reservoir
72 L
Hydraulic reservoir
15.1 L
- 1960 mm dozer blade
- 400 mm rubber track
- 5 inch display
- Auto idle
- Adjustable double acting auxiliary hydraulic (AUX1) with QC on ARM
- Battery disconnect switch
- Blade float feature
- Clamp ready
- Control console locks
- Cupholders
- Dual Direction Detent
- Dual flanged rollers
- Engine/hydraulic monitor with shutdown
- Foldable and ergonomic pedals
- Full fuel warning alarm
- Horn
- Hydraulic joystick controls
- Machine IQ (telematic)
- Proportional fingertip auxiliary and boom swing offset
- Retractable seat belt
- Selectable auxiliary hydraulic flow
- Suspension seat with high back
- Storage compartment
- Tool box
- TOPS/ROPS/FOPS cab * (1)
- Two-speed travel with Auto shift
- Upper structure tie down
- LED Work lights
- Warranty: 24 months, 2000 hours (whichever occurs first)
(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.
- Air conditioning
- Long dipperstick
- 2nd Auxiliary hydraulics
- Dlx textile suspension seat
- Boom safety valve with overload warning
- Boom & arm safety valves with overload warning
- AM/FM stereo radio
- FOGS kit (Overhead guard)
- Lifting chain kit
- Travel motion alarm
- Steel tracks
- Beacon kit
- Left and right mirror
- Additional work light kit
- Rubber bolt-on pads for steel tracks
- Special applications kit
- Hydraulic coupler lines
Некоторые данные основаны на инженерных расчетах, а не на результатах измерений. Данные приведены только для целей сравнения и могут быть изменены без предварительного уведомления. Технические данные вашей машины Bobcat могут варьироваться в соответствии с обычными изменениями, которые могут быть внесены в конструкцию или технологию изготовления, а также в соответствии с условиями работы и другими факторами.