S100 Skid-Steer Loader Specifications & Options
Dimensions
Emissions Tier (EPA) |
Tier 4 |
Loader Series |
K-Series |
Rated Operating Capacity (ROC) (ISO 14397-1) |
457 kg |
Tipping Load (ISO 14397-1) |
914 kg |
Height to Hinge Pin |
2633 mm |
Lift Arm Path |
Radius |
Size and Speed
Operating Weight |
1860 kg |
Width with Bucket |
1270 mm |
Height with Cab |
1878 mm |
Travel Speed – Low Range |
8.2 km/h |
Travel Speed – High Range (optional 2-Speed travel) |
13.4 km/h |
Engine
Horsepower |
24.8 HP |
Type |
Natural
Aspirated
|
Fuel Tank Capacity |
45.0 L |
Control Options
Control Options |
Std |
Radio Remote Control (SJC required) |
- |
Standard Features
Back-up Alarm & Horn |
Std |
Bobcat Interlock Control System (BICSTM) |
Std |
Cab with Heat & Air Conditioning |
Opt |
Hydraulic Bucket Positioning |
Opt |
Front and Rear Work Lights |
Opt |
ROPS/FOPS Approved Cab Structure |
Std |
Options
Attachment Control Kit |
Opt |
Bob-Tach Mounting System |
Std |
Fingertip Auxiliary Hydraulics Control |
Opt (w/SJC) |
Hydraulic System Pressure |
207 Bar |
Hydraulic Standard Flow |
36.4 L/min |
Pressure Release Hydraulic Quick Couplers
(Drain port) |
Opt (w/SJC) |
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.