China
Oceania
Europe
Korea
Latin America
India
Middle East and Africa
North America
Russia & CIS
South and Southeast Asia

Find a Dealer

E88 Compact Excavator

Specifications & Options

E88

Close/Open all PDF version
Operating weight with ROPS HVAC cab, rubber tracks, counterweight, standard bucket 600 mm (223 kg) (SAE J732)
8,919 kg
Additional weight for segmented tracks
74 kg
Additional weight for steel tracks
16 kg
Additional weight for long dipperstick
37 kg
Additional weight for counter weight
407 kg
Ground pressure with rubber tracks
39.2 kPa
(A)
Bucket pivot angle
170 °
(B)
Maximum reach of working equipment
7,225 mm
(B*)
Maximum reach of working equipment, long dipperstick
7,549 mm
(C)
Maximum reach at ground level
7,087 mm
(C*)
Maximum reach at ground level, long dipperstick
7,418 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,659 mm
(D*)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,964 mm
(E)
Maximum blade height
479 mm
(F)
Maximum blade depth
410 mm
(G)
Maximum height of working equipment with dipperstick retracted
4,983 mm
(H)
Maximum bucket tooth height
6,887 mm
(H*)
Maximum bucket tooth height, long dipperstick
7,115 mm
(I)
Maximum dump height
4,537 mm
(I*)
Maximum dump height, long dipperstick
4,765 mm
(J)
Maximum depth of vertical wall which can be excavated
2,587 mm
(J*)
Maximum depth of vertical wall which can be excavated, long dipperstick
2,883 mm
(K)
Maximum digging depth
4,519 mm
(K*)
Maximum digging depth, long dipperstick
4,859 mm
()
(* Dentoes values which long dipperstick installed)
(A)
Blade height
462 mm
(B)
Clearance, upper structure to ground line
710 mm
(C)
Ground line to top of engine cover
1,666 mm
(D)
Length of track on ground
2,311 mm
(E)
Machine centre line to blade
2,009 mm
(F)
Minimum radius in travel position
4,872 mm
(G)
Overall length of track assembly
2,896 mm
(H)
Overall length in travel position
6,329 mm
(H*)
Overall length in travel position, long dipperstick
6,341 mm
(I)
Track lug height
30 mm
(J)
Blade width
2,200 mm
(K)
Height
2,540 mm
(L)
Track width
450 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
622 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
907 mm
(O)
Minimum turning radius
2,202 mm
(P)
Swing clearance, rear
348 mm
(P*)
Swing clearance, add-on counterweight
468 mm
(Q)
Working width at maximum right-hand rotation
2,600 mm
(R)
Working width at maximum left-hand rotation
2,525 mm
Make / model
Bobcat D24 - 2.4L, 97/68 EC Stage V, Turbocharged
Fuel
Ultra Low Sulfur Diesel
Number of cylinders
4
Displacement
2,392 cm3
Maximum NET power (ISO 9249)
48.5 kW
Maximum NET torque (ISO 9249)
248 Nm
Pump type
Engine driven, variable displacement piston pump with pressure-compensating, load-sensing, and torque-limiter control
Pump capacity
149 L/min
System relief pressure for implement circuits
295 bar
Auxiliary (AUX1) flow
95 L/min
Auxiliary (AUX2) flow
62 L/min
Digging force, dipperstick (ISO 6015)
39,073 N
Digging force, long dipperstick (ISO 6015)
35,315 N
Digging force, bucket (ISO 6015)
55,582 N
Travel speed, low range
2.5 km/h
Travel speed, high range
4.4 km/h
Boom swing, left
64 °
Boom swing, right
61 °
Slew rate
9 RPM
Cooling system
9.5 L
Engine lubrication plus oil filter
9.8 L
Fuel reservoir
116 L
Hydraulic reservoir
21.4 L
Hydraulic system
81.4 L
Noise level LpA(EU Directive 2006/42/EC)
77 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
96 dB(A)
Whole body vibration (ISO 2631–1)
0.2 ms-2
Hand-arm vibration (ISO 5349–1)
0.4 ms-2
  • 2200 mm dozer blade
  • 450mm rubber track
  • 5 inch display
  • Air conditioning (Cab with HVAC)
  • Auto idle
  • Adjustable double acting auxiliary hydraulic (AUX1) with QC on ARM
  • Battery disconnect switch
  • Blade float feature
  • Boom & arm safety valves with overload warning
  • Clamp ready
  • Control console locks
  • Cupholders
  • Dual Direction Detent
  • Dual flanged rollers
  • Engine/hydraulic monitor with shutdown
  • Fuel refill pump with auto shut-off
  • One-piece ergonomic pedals
  • Full fuel warning alarm
  • Horn
  • Hydraulic coupler lines (AUX5)
  • Hydraulic joystick controls
  • Proportional fingertip auxiliary and boom swing offset
  • Retractable seat belt
  • Selectable auxiliary hydraulic flow
  • Deluxe textile suspension seat with head rest
  • Storage compartment
  • Tool box
  • TOPS/ROPS/FOPS cab * (1)
  • Two-speed travel with Auto shift
  • Upper structure tie down
  • LED Work lights front
  • Warranty: 24 months, 2000 hours (whichever occurs first)

(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.

  • 7" touch screen
  • Long dipperstick
  • Add-on counterweight
  • 2nd Auxiliary hydraulics
  • Tilt coupler lines (AUX4)
  • Heated Deluxe textile suspension seat with head rest
  • AM/FM MP3 stereo radio with Bluetooth
  • FOGS kit (Overhead guard)
  • Travel motion alarm
  • Beacon kit
  • Special applications kit (Front windscreen protection)
  • Keyless ignition kit
  • Keyless ignition Deluxe
  • Add-on counterweight kit
  • Case drain line kit
  • Direct to Tank kit
  • Clamp with AUX1 valve kit
  • Blade load holding valve
  • 450 mm Segmented tracks kit
  • Rear view camera kit
  • Rear LED light Kit
  • Depth Check Kit

Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.