E55z Compact Excavator
Specifications & Options
E55z
Close/Open all PDF version
Operating weight
5,271 kg
Additional weight for cab with HVAC
19 kg
Additional weight for steel tracks
125 kg
Additional weight for angle blade
176 kg
Additional weight for long dozer blade
176 kg
Ground pressure with rubber tracks
30 kPa
(A)
Bucket pivot angle
186 °
(B)
Maximum reach of working equipment
5,983 mm
(B)
Maximum reach of working equipment, long dipperstick
6,361 mm
(C)
Maximum reach at ground level
5,843 mm
(C*)
Maximum reach at ground level, long dipperstick
6,232 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,541 mm
(D*)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick
2,638 mm
(E)
Maximum blade height
390 mm
(F)
Maximum blade depth
547 mm
(G)
Maximum height of working equipment with dipperstick retracted
4,272 mm
(H)
Maximum bucket tooth height
5,513 mm
(H*)
Maximum bucket tooth height, long dipperstick
5,768 mm
(I)
Maximum dump height
3,558 mm
(I*)
Maximum dump height, long dipperstick
4,213 mm
(J)
Maximum depth of vertical wall which can be excavated
2,485 mm
(J*)
Maximum depth of vertical wall which can be excavated, long dipperstick
2,878 mm
(K)
Maximum digging depth
3,434 mm
(K*)
Maximum digging depth, long dipperstick
3,834 mm
()
(* Dentoes values which long dipperstick installed)
(A)
Blade height
422 mm
(B)
Clearance, upper structure to ground line
627 mm
(C)
Ground line to top of engine cover
1,659 mm
(D)
Length of track on ground
2,004 mm
(E)
Machine centre line to blade
1,784 mm
(F)
Minimum radius in travel position
4,300 mm
(G)
Overall length of track assembly
2,523 mm
(H)
Overall length in travel position
5,561 mm
(H*)
Overall length in travel position, long dipperstick
5,558 mm
(I)
Track lug height
24 mm
(J)
Blade width
1,959 mm
(K)
Height
2,566 mm
(L)
Track width
400 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
586 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
872 mm
(O)
Minimum turning radius
2,027 mm
(P)
Swing clearance, rear
1,000 mm
(P*)
Swing clearance, rear heavy counterweight
1,071 mm
(Q)
Working width at maximum right-hand rotation
1,976 mm
(R)
Working width at maximum left-hand rotation
1,881 mm
Make / model
Bobcat 1.8L, 97/68 EC Stage V
Fuel
Diesel
Number of cylinders
3
Displacement
1.8 L
Maximum NET power (ISO 9249)
36.4 kW
Maximum NET torque (ISO 9249)
180 Nm
Pump type
Single outlet variable displacement piston pump with gear pumps
Piston pump capacity
138.6 L/min
System relief pressure for implement circuits
250 bar
Boom port relief base and rod end
290.0 - 290.0 bar
Auxiliary (AUX1) flow
80.5 L/min
Auxiliary (AUX2) flow
45.4 L/min
Digging force, dipperstick (ISO 6015)
30,993 N
Digging force, long dipperstick (ISO 6015)
26,301 N
Digging force, bucket (ISO 6015)
44,297 N
Travel speed, low range
2.9 km/h
Travel speed, high range
4.6 km/h
Boom swing, left
75 °
Boom swing, right
50 °
Slew rate
9.3 RPM
Cooling system
7.6 L
Engine lubrication plus oil filter
6.3 L
Fuel reservoir
72 L
Hydraulic reservoir
15.1 L
- 1960 mm dozer blade
- 400 mm rubber track
- Deluxe display with integrated keyless
- Auto idle
- Adjustable double acting auxiliary hydraulic (AUX1) with QC on ARM
- Battery disconnect switch
- Blade float feature
- Clamp ready
- Control console locks
- Cupholders
- Dual Direction Detent
- Dual flanged rollers
- Engine/hydraulic monitor with shutdown
- Foldable and ergonomic pedals
- Full fuel warning alarm
- Horn
- Hydraulic joystick controls
- Proportional fingertip auxiliary and boom swing offset
- Retractable seat belt
- Selectable auxiliary hydraulic flow
- Suspension seat with high back
- Storage compartment
- Tool box
- TOPS/ROPS/FOPS cab * (1)
- Two-speed travel with Auto shift
- Upper structure tie down
- LED work lights (boom + 2x canopy)
- Warranty: 24 months, 2000 hours (whichever occurs first)
(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.
- Air conditioning (Cab with HVAC)
- Auto Air conditioning (Cab with Auto HVAC)
- Deluxe display with integrated keyless
- Long dipperstick with heavy counterweight
- 2nd Auxiliary hydraulics
- Case drain line
- Clamp with AUX1 valve
- Tilt coupler lines (AUX4)
- Hydraulic coupler lines (AUX5)
- Deluxe textile suspension seat
- Heated Deluxe textile suspension seat with head rest
- Boom safety valve
- Boom & arm safety valves with overload warning
- AM/FM MP3 stereo radio with Bluetooth
- FOGS kit (Overhead guard)
- Lifting chain kit
- Travel motion alarm
- 400 mm Steel tracks
- 400 mm Segmented tracks
- Left and right mirror kit
- Fire extinguisher
- Additional LED work light kit
- Rubber bolt-on pads for steel tracks
- Machine IQ (telematic)
- Special applications kit (Front windscreen protection)
- Bucket valves (AUX3) kit
- Depth Check kit
- Rear LED light Kit
- Angle Blade
- Beacon
- Auto Track Tensioning
- Rubber bolt-on pads for steel tracks
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.