E50z Compact Excavator
Specifications & Options
E50z
Close/Open all PDF version
Operating weight
4,900 kg
Operating weight with canopy
4,819 kg
Additional weight for cab with HVAC
19 kg
Additional weight for steel tracks
125 kg
Ground pressure with rubber tracks
35.4 kPa
(A)
Bucket pivot angle
186 °
(B)
Maximum reach of working equipment
6,056 mm
(C)
Maximum reach at ground level
5,922 mm
(D)
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted
2,593 mm
(E)
Maximum blade height
370 mm
(F)
Maximum blade depth
502 mm
(H)
Maximum bucket tooth height
5,499 mm
(I)
Maximum dump height
4,015 mm
(J)
Maximum depth of vertical wall which can be excavated
2,462 mm
(K)
Maximum digging depth
3,553 mm
()
(* Dentoes values which long dipperstick installed)
(A)
Blade height
373 mm
(B)
Clearance, upper structure to ground line
608 mm
(C)
Ground line to top of engine cover
1,640 mm
(D)
Length of track on ground
1,803 mm
(E)
Machine centre line to blade
1,692 mm
(F)
Minimum radius in travel position
4,250 mm
(G)
Overall length of track assembly
2,276 mm
(H)
Overall length in travel position
5,395 mm
(I)
Track lug height
25 mm
(J)
Blade width
1,959 mm
(K)
Height
2,546 mm
(L)
Track width
350 mm
(M)
Machine centre line to working equipment centre line, left-hand rotation
527 mm
(N)
Machine centre line to working equipment centre line, right-hand rotation
872 mm
(O)
Minimum turning radius
2,075 mm
(P)
Swing clearance, rear
1,035 mm
(Q)
Working width at maximum right-hand rotation
2,016 mm
(R)
Working width at maximum left-hand rotation
2,006 mm
Make / model
Bobcat 1.8L, 97/68 EC Stage V Turbocharged
Fuel
Diesel
Number of cylinders
3
Displacement
1.8 L
Maximum NET power (ISO 9249)
31.3 kW
Maximum NET torque (ISO 9249)
155 Nm
Pump type
Single outlet variable displacement piston pump with gear pumps
Piston pump capacity
99 L/min
Auxiliary relief
210.0 bar
Boom port relief base and rod end
290.0 - 290.0 bar
Auxiliary (AUX1) flow
78.2 L/min
Auxiliary (AUX2) flow
46.6 L/min
Digging force, dipperstick (ISO 6015)
22,171 N
Digging force, bucket (ISO 6015)
37,744 N
Travel speed, low range
2.8 km/h
Travel speed, high range
5.5 km/h
Boom swing, left
75 °
Boom swing, right
50 °
Slew rate
8.7 RPM
Cooling system
7.6 L
Engine lubrication plus oil filter
6.3 L
Fuel reservoir
72 L
Hydraulic reservoir
15.1 L
Noise level LpA(EU Directive 2006/42/EC)
75 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
95 dB(A)
Whole body vibration (ISO 2631–1)
0.1 ms-2
Hand-arm vibration (ISO 5349–1)
0.4 ms-2
- 1960 mm dozer blade
- 350 mm rubber track
- Deluxe display with integrated keyless
- Auto idle
- Adjustable double acting auxiliary hydraulic (AUX1) with QC on ARM
- Battery disconnect switch
- Blade float feature
- Clamp ready
- Control console locks
- Cupholders
- Dual Direction Detent
- Engine/hydraulic monitor with shutdown
- Foldable and ergonomic pedals
- Full fuel warning alarm
- Horn
- Hydraulic joystick controls
- Proportional fingertip auxiliary and boom swing offset
- Retractable seat belt
- Selectable auxiliary hydraulic flow
- Suspension seat with high back
- Storage compartment
- Tool box
- TOPS/ROPS/FOPS cab * (1)
- Two-speed travel with Auto shift
- Upper structure tie down
- LED work lights (boom + 2x canopy)
- Warranty: 24 months, 2000 hours (whichever occurs first)
(1) Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449.
- Air conditioning (Cab with HVAC)
- 2nd Auxiliary hydraulics
- Deluxe textile suspension seat
- Boom safety valve
- Boom & arm safety valves with overload warning
- Heated Deluxe textile suspension seat with head rest
- FOGS kit (Overhead guard)
- Lifting chain kit
- Travel motion alarm
- 300 mm steel tracks
- Machine IQ (telematic)
- Beacon kit
- Left and right mirror kit
- Rear LED light
- Special applications kit (Front windscreen protection)
- Auto Air conditioning (Cab with Auto HVAC)
- 7" touch screen
- Heated Deluxe textile suspension seat with head rest
- Case drain line
- Clamp with AUX1 valve
- Tilt coupler lines (AUX4)
- Hydraulic coupler lines (AUX5)
- Heated Deluxe textile suspension seat with head rest
- Beacon
- Fire extinguisher
- Bucket valves (AUX3) kit
- Depth Check Kit
- Auto Track Tensioning
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.