Rotary Telehandlers / TR60.210 Rotary Telehandler
Specifications & Options
TR60-210
Close / Open all PDF version
Rated capacity
6,000 kg @ 600 mm Load Center
Max. lifting height (stabilisers fully extended)
20.8 m
Capacity at max. height (stabilisers fully extended)
3,500 kg
Turret Rotation
360° (Continous)
Max. speed
40 km/h
Type
Telescopic scissors
Stabilization system
Ground pressure detection. Automatic levelling. Lifting capacity adjusted in proportion to stabiliser extension
Weight (unladen)
17,600 kg
Make / Model
DEUTZ TCD 3.6 L4 EDG
Compliancy
stage IIIA
Rated power (ISO 14396)
100 kW (134 hp) @ 2,200 rpm
Maximum torque
500 Nm @ 1,600 rpm
Number of cylinders
4.0
Displacement
3.6 L
Pump type
Load Sensing pump
Pump capacity
105 L/min
Relief valve pressure setting
350 bar
Control valve (boom and turret)
Electro-proportional with flow sharing
Transmission
Hydrostatic with electronic regulation / 4 wheel drive
Main drive
Electronically controlled variable displacement pump. Variable displacement motor. 2-speed gear box
Standard tyres
445/65 R22,5
Towing force
72 kN
Gradeability
41 %
Axle type
Oil-immersed axles with planetary gears
Rear axle
Oscillating and steering with hydraulic locking
Front axle
Oscillating and steering with levelling +/-8°
Service brake
Hydraulically operated wet multi-disk brakes on each axle
Parking brake
Hydraulic with negative action
Steering modes
3 steering modes with semi-automatic wheel realignment. 2 wheel steering / 4 wheel steering / Crab-steer
External turning radius (with forks)
4 m
Fuel tank
175 L
Hydraulic reservoir
165 L
Operator noise level (LpA) (En 12053)
72 dB(A)
Level of acoustic power (LWA)
106 dB(A)
Whole body vibration (ISO 2631-1):
0.5 ms-2
Hand-arm vibration (ISO 5349–1)
0.6 ms-2
Standard compliance
EN 1459-2: slewing variable-reach trucks. EN 13000: hydraulic cranes. EN 280: mobile elevating work platforms. FOPS/ROPS cabin
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.