S550 Skid-Steer Loader
Specifications & Options
European Specifications
S550
Close/Open all PDF version
Tipping load (ISO 14397-1)
1,852 kg
Rated operating capacity (ISO 14397-1)
926 kg
Pump capacity
64.7 L/min
Pump capacity (with high flow option)
101.1 L/min
System relief at quick couplers
23.8-24.5 MPa
Max. travel speed (high range - option)
17.3 km/h
Max. travel speed (low range)
11.8 km/h
Make / Model
Bobcat 2.4L, 97/68 EC Stage V
Fuel
Diesel
Cooling
Liquid
Power at 2600 RPM:
50.7 kW
Torque at 1800 RPM (SAE J1995 Gross):
252 Nm
Number of cylinders
4
Displacement
2,392 cm3
Fuel tank
93.7 L
Operating weight
2,995 kg
Shipping weight
2,612 kg
(A)
Operating height
3,787 mm
(B)
Height with operator cab
1,972 mm
(C)
Angle of departure
24.2 °
(D)
Ground clearance
185 mm
(E)
Wheelbase
1,082 mm
(F)
Length without attachment
2,657 mm
(G)
Length with standard bucket
3,378 mm
(H)
Rollback at ground position
30 °
(I)
Dump height with standard bucket
2,205 mm
(J)
Height to bucket hinge pin
2,908 mm
(K)
Dump reach at maximum height
467 mm
(L)
Dump angle at maximum height
42 °
(M)
Rollback fully raised at maximum height
97 °
(N)
Width over standard bucket
1,727 mm
(O)
Turning radius with standard bucket
2,032 mm
(P)
Track, standard tyres
1,374 mm
(Q)
Width over standard tyres
1,643 mm
(Q*)
Width over tyres, 10 x 16.5, 10-ply, Heavy duty, offset rims
1,520 mm
Vehicle steering
Selectable Joystick Controls (SJC) or optional Hand Levers
Loader hydraulics tilt and lift
Selectable Joystick Controls (SJC) or optional Foot Pedals
Front auxiliary (standard)
Selectable Joystick Controls (SJC) or optional Proporcional switch on Hand Levers
Transmission
Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
- 10 x 16.5, 10–ply, Versatile duty tyres
- Selectable Joystick Controls (SJC - R/C Ready)
- High-flow auxiliary hydraulics
- 7-pin attachment control
- 2 Speed
- Bobcat Interlock Control System (BICS)
- Parking brake
- Deluxe operator cab* Includes interior cab foam, side, top and rear windows, Deluxe wire harness, dome light and electrical power port (1)
- Noise reduction kit
- Operating lights, front and rear
- Deluxe instrument panel
- Keyless start with password capability
- Suspension seat
- Seat belt
- Seat bar
- Hydraulic bucket positioning (including ON/OFF switch)
- Bob-Tach™ frame
- Cushioned lift and tilt cylinders
- Lift arm support
- Engine/hydraulics system shutdown
- Spark Arrester
- Automatically activated glow plugs
- Electrically activated proportional front auxiliary hydraulics
- Auxiliary hydraulics: variable flow/maximum flow
- Machine IQ (telematic)
- Manual
- CE certification
- Warranty: 24 months or 2000 hours (whichever occurs first)
(1) Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471; Falling Object Protective Structure (FOPS) - meets requirements of SAE-J1043 and ISO 3449, Level I
- Factory Options
- Deluxe pressurized cab with heating
- Deluxe pressurized cab with HVAC
- Cloth Suspension Seat
- 10 x 16.5, 10–ply, Heavy duty tyres, offset rims
- 31 x 12-16.5, 10–ply, Superflotation tyres
- 10 x 16.5, 10–ply, Severe duty tyres
- 31 x 10 - 20, Industrial duty tyres
- Power Bob-Tach™
- Back-up alarm
- Radio
- Beacon
- Work Lights LED
- Strobe
- Road Option
- Automatic Ride Control
- Automatic Reversing Fan
- Custom paint color (min order of 5 units)
- Dealer Installed Options
- Cab enclosure kit
- Special applications front door kit
- 200 lbs (74.4 kg) counterweight kit
- Front axle counterweight kit
- Fuel cap locking kit
- Deluxe instrument panel
- Replacement Bob-Tach™
- Fresh air heater kit
- Front door kit
- Door sensor kit
- Plumbing kit for fresh air heater
- Back up alarm kit
- FOPS kit **
- Single-point lift kit
- Power Bob-Tach™ kit
- Operator cab, CE, enclosure kit
- 7-pin attachment control
- Four-point lift kit
- Rear auxiliary hydraulic kit
- Engine block heater kit
- Road kit
- Bucket positioning kit
- Keyless kit
- Rear window wiper kit
- 14-pin attachment control kit
- 4-Way flasher kit
- 80 mm Suspension seat kit
- Cup holder kit
- Headlight guard kit
- Muffler guard kit
- Tail light guard kit
- Auger Accessories
- Augers
- Backhoes
- Bale Forks
- Box Blades
- Breaker Accessories
- Breakers
- Brush Saws
- Brushcat™ Rotary Cutters
- Combination Buckets
- Concrete Mixers
- Concrete Pumps
- Construction / Industrial Buckets
- Diggers
- Dozer Blades
- Drop Hammers
- Dumping Hoppers
- Flail Cutters
- Graders
- Grapples, Industrial
- Landplanes
- Landscape Rakes
- Laser Equipment
- Low Profile Buckets
- Miscellaneous
- Mixing Buckets
- Mowers
- Pallet Fork Accessories
- Pallet Forks, Hydraulic
- Planer Accessories
- Planers
- Rear Stabilizers
- Remote Control
- Root Grapples
- Scarifiers
- Scrapers
- Seeders
- Skeleton Buckets
- Snow Blades
- Snow Pushers
- Snow V-Blades
- Sod Layers
- Soil Conditioners
- Spreader
- Spreaders
- Steel Tracks
- Stump Grinders
- Sweepers
- Tillers
- Tilt-Tatch
- Tree Transplanters
- Trench Compactors
- Trenchers
- Utility Forks
- Utility Frames
- Vibratory Rollers
- Wheel Saws
- Wood Chippers
Operator LpA(98/37 & 474-1)
86 dB(A)
Noise level LWA(EU Directive 2000/14/EC)
101 dB(A)
Whole body vibration (ISO 2631–1) High speed
0.9 ms-2
Whole body vibration uncertainty
0.5 ms-2
Hand-arm vibration (ISO 5349–1) High speed
1.6 ms-2
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual Bobcat equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.